175L 2.4KW Stainless Steel Ultrasonic Cleaning Equipment With 0 - 95C Heater

175L ULTRASONIC CLEANING EQUIPMENTS WITH 0-95℃ HEATER AND 2.4KW ULTRASONIC POWER
 
1.  How Does it Work?   
 
1). Ultrasonic Cleaning Systems are based on high-frequency sound waves which are transmitted through a flowing liquid where the piece to be clean is submerged. Treatment takes between 10 and 45 minutes, but no operator presence is needed. 
 
2). Ultrasonic waves produce cavitation, in which millions of gas bubbles are generated into the liquid, and then compressed until they implode, releasing huge amounts of energy. This energy hits the dirt, grease or carbon dust over the surface of the objects to be cleaned, removing it without damaging the piece.
 
3). The result is a micro-brushing phenomenon which cleans the pieces treated. As gas bubbles are only 1 um, they penetrate into every orifice, making Ultrasonic Cleaning best system for highly complex components in any kind of material (cast iron, steel, aluminium, copper, brass, titanium, bronze, some plastics & rubbers, ....).
 
 
2. Ultrasonic mold cleaners are the most effective way to improve the performance of your tool room.
Ultrasonic mold cleaning removes contamination from mold surfaces as well as intricacies such as vent paths, ejector pin holes, cooling channels and other tiny areas that manual cleaning can’t reach. The ultrasonic mold cleaning process is non-abrasive, eliminating rolled edges. Ultrasonic mold cleaning is hands-free, eliminating the manual labor involved with hand cleaning. Plus, our whale cleen Sonic mold cleaning systems are environmentally friendly because we provide you with specially formulated water-based detergents that are less expensive and less hazardous than spray solvents. Our customers no longer have to store, work with, or dispose of toxic cleaning agents.
 
3. Detail Information Of Z-X48:

 
 
4. Cleaning Effect:
 


5. Packing Method:
 

 
6.  Why you should choose Whale Cleen?
 
1). Highest Cleaning Power
Whale Cleen, the leading ultrasonic technology with our Class 1 transducers and electronic synchronized generators.
2). Lowest Energy Consumption
Save yearly up to EU1,700.00 in energy. All equipments are full thermal Xtra-insulated (70mm] Green Label features, with new unigue internal automated functions: ECO mode. Programmable heating timer and Energy+Cost Monitoring Cleaning Time.
3). Highest Quality Surface Cleaning
Microscopic cleaning quality and homogeneous results even with complex parts. Always free from oil/grease with our Patented Technology. 
4). Labour and Cost Savings
Save up to 80% labor time vs traditional systems by avoiding operator presence during cleaning cycles. And reduce by six times your water & detergent consumption.
5). Health and Safety
Avoid direct contact with chemical products during cleaning. Our equipments guarantee highest security standards for users in accordance with all relevant safety regulations