Mechanical Timer Ultrasonic Gun Cleaner 200 Watt 10L For Hand Gun

200 Watt Mechanical Timer Ultrasonic Gun Cleaner For Hand Gun

How Whale Cleen Ultrasonic Gun Cleaner Works?

Ultrasonic transducers mounted to the tank bottom produce high frequency sound waves which cause rapidly alternating high & low pressure conditions in the cleaning solution. Millions of microscopic bubbles form and then implode (a process called cavitation) resulting in an intense scrubbing action that removes fouling even in the smallest indentations, grooves and impossible to reach by hand areas.

Using water based detergents with rust inhibitor and heat, unburned powder, carbon, lint, oil & dirt will be quickly removed from the field stripped gun parts usually within 4-6 minutes of immersion with minimal hand labor. Heated ultrasonic cleaning, followed by rinsing and ultrasonic lubrication with supplied lube pan and special oil, insures that the parts are moisture free and protected. After excess lubricant is removed from the parts with compressed air, they can be lubricated in accordance with manufacturer's instructions or your S.O.P.

The parts are then restored to factory new level of cleanliness which could not be achieved by the usual hand cleaning methods. The process does not affect night sights, rubber grips, and plastic frames or leave the parts dried out and unprotected.

We continue to lead the ultrasonic firearm cleaning industry with high quality equipment, chemistry, user friendly innovations and customer support. The first to offer non-hazardous odorless chemicals, heated tanks, Sweep Frequency technology and a fast process. Our combination of features gives you the best equipment and performance available for your investment and personal safety.

There are over 18 standard systems to choose from, each containing all required accessories and chemicals. In addition to firearm systems, there are kits available that will clean and disinfect hand cuffs, clean disinfect and decontaminate SCBA, respirators and clean communications equipment. There is a two year parts and labor and lifetime heater warranty on the table top systems.

Please contact us with any specific application questions via the firearm system recommendation link on the home page or by phone. Make GUNCLEANERS your cleaning partner!

Specification:  

Cleaning Feedback From Customer:

FAQ:

1. What frequency is better for my parts?

Frequency is suggested based on pollutants in the objects.

28kHz frequency is stronger, better for car/motor/truck/vessel parts clean(oils, grease,rust,pastes, etc. )

40kHz is better for pcb boards, electronic parts, etc.

Higher precision goods, higher frequency.

2. Can ultrasonic cleaning damage parts?

Ultrasonic cleaning is considered safe for most parts; although in some cases it is necessary to observe caution. Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe.