Rings Ultrasonic Jewelry Cleaning Machine

800ml Ultrasonic Jewelry Cleaner With Power Adjustable For Rings

How Do Whale Cleen sonic Ultrasonic Cleaners Work?

An ultrasonic cleaner is a device that uses ultrasound(Frequency over 20KHz) to remove the dirt from your jewelry.

The items are placed in a tank filled with a cleaning solution.

After the cleaner is turned on, its motor produces ultrasonic vibrations through the liquid.

These vibrations break down the dirt particles accumulated on the surface of your jewelry.

The good thing about ultrasonic cleaners is that they can clean the parts of your jewelry that are otherwise unreachable when using more conventional methods.

The Cleaning Process Of Rings: 

After you have filled the tank with hot water and poured the cleaning liquid, you can put your jewelry inside. Don’t put in too many pieces at once, though, so as not to scratch your jewelry.

Turn the device on and let it run for as long as needed until you jewelry is clean. (Depending on how dirty the items are, this time usually varies from 1 to 20 minutes.)

After the cleaning is done, switch the cleaner off and leave your jewelry inside for another 5-10 minutes so that the dirt particles that were knocked off your pieces by the sound waves can fall to the bottom of the tank.

After you take your jewelry out, you can clean it briefly with a soft brush to make sure that any residual dirt is removed, especially from the mountings of your rings.

Rinse the items to wash off any remaining detergent, and dry them with a soft cloth.

Specification Of HS-008:

Customer's Feedback Of Rings Cleaning:

How Often Should You Use an Ultrasonic Cleaner?

The frequency of using an ultrasonic cleaner will depend on how quickly your jewelry gets dirty.

In general, you can clean your jewelry with ultrasound every couple of weeks.

If you wear you pieces every day and they accumulate dirt more quickly, you can clean them every week.

As long as your jewelry is made of materials that can take ultrasound, cleaning your items more often will not hurt them.

What You Should Not Put in an Ultrasonic Cleaner?

Not all jewelry should be cleaned with an ultrasonic device.

Many gemstones can be easily damaged by ultrasound. Do not put in softer gemstones such as opals, lapis lazuli, emeralds, turquoise, etc.

Organic jewelry such as pearls, coral pieces, or amber can also be damaged.

Also, do not put inside your ultrasonic cleaner gemstones whose color has been enhanced through heat treatment.