Bracelet Jewellery Cleaner Ultrasonic Machine 2L Metal Ultrasonic Cleaner

Digital Control Ultrasonic Jewelry Cleaner 2L With Heater For Bracelet
 

What Can I Clean With Whale Cleen sonic Ultrasonic Cleaners? 
 
Metals such as gold and platinum are safe to clean with ultrasonic devices.
Hard natural gemstones can also be put into an ultrasonic cleaner provided that they have few inclusions and have not been treated with heat or chemicals.
Anyway, be sure to ask the jeweler at the time you purchase any piece of jewelry whether it can be cleaned with an ultrasonic cleaner.
There might be unsuitable alloys or gems, or some gemstones may have been treated, becoming more vulnerable in the process.
 
Why You Need Whale Cleen sonic Ultrasonic Cleaner?
 
You may have taken your jewelry to the jewelers to get cleaned. They offer this service free and then tell you what problems the piece has.

• If your jewelry was not bought from them you may have to pay extra money for the jewelry cleaning.
• Ultrasonic cleaner will be the best way to clean the jewelry for you .With your own ultrasonic cleaner you can clean your jewelry the same way the professionals do it.
• This method can save money, time and is very easy to use, safe environmentally.

Datasheet Of Z-S01:

 
Bracelet Cleaning Feedback:
 

How To Clean Your Jewelry With Whale Cleen sonic Ultrasonic Cleaner?


1. Fill the tank of your cleaner with water adding a tablespoon of ammonia. Don't use too much because it can be harmful.

2. Add some dishwashing liquid, and you are done.

3. Turn on the cleaner and let it run without any items for 5-10 minutes so that the solution gets mixed well.

4. Put your item(s) into the tank. Remember not to put in too many pieces at once or it may scratch your jewelry.

5. Heat the solution to hot and set temperatures you need.

• To work best, it needs to heat the solution hot. There are many ultrasonic cleaners that have a built-in heater to ensure that the solution is heated up. They differ in price.

• Just heat the water up before you put it in the tank.

• Do not bring the water to a boil.

• Mix in the ammonia and the dishwashing liquid

• Set the temperatures you need.

6. Turn the device on. Let it run for as long as needed until your jewelry is clean.

• Depending on how dirty the items are, this time usually varies from 1 to 20 minutes

7. When the cleaning is done, switch the cleaner off. Leave your jewelry inside for another 5-10 minutes so that the dirt particles can fall to the bottom of the tank.

8. Take your jewelry out and clean it briefly with a soft brush. Make sure that any residual dirt is removed, especially from the mountings of your rings.

9. Rinse the items. Wash off any remaining detergent, and dry them with a soft cloth.